自动化数控车床试运转前的准备

 

     Preparations for Trial Operation of Automated NC Lathe

 

1、在运用前，斜床身数控车床要先经过几许精度检验合格，然后再清理整机。具体地，就是要利用含有清洗剂的棉布或绸布来清洗，这一阶段不得运用棉纱或纱布，避免出现机器卡阻现象，也就是说要把斜床身数控车床在出厂时为保护导轨面和加工面而涂上的防锈油或防锈漆清洗掉，一起洗干净表面面的尘埃。与此一起，在各滑动面及工作面涂上厂家指定的光滑油。

 

1. Before operation, the inclined bed NC lathe must pass a few precision tests before cleaning the whole machine. Specifically, it is necessary to use cotton or silk cloth containing detergent to clean. At this stage, cotton yarn or gauze should not be used to avoid machine blockage. That is to say, the anti-rust oil or anti-rust paint applied on the inclined bed NC lathe to protect the guide rail surface and the processing surface should be cleaned out when it leaves the factory, and the surface should be cleaned together. The dust. Together, smooth oils designated by manufacturers are applied to all sliding surfaces and working surfaces.

2、还要仔细检查斜床身数控车床各部位是否已经依据相关要求把油加满了，冷却箱中的冷却液是否充足。车床液压站、主动间光滑设备的油是否能够到达油位指示器规则的部位。

 

2. Check carefully whether the parts of the inclined bed NC lathe have filled the oil according to the relevant requirements, and whether the cooling fluid in the cooling box is sufficient. Whether the oil of lathe hydraulic station and active smoothing equipment can reach the regular position of oil level indicator.

 

3、一起对电气控制箱中各开关及元器件是否正常，各插装集成电路板是否正常运作进行检查。

 

3. Check whether the switches and components in the electric control box are normal and whether the integrated circuit boards are working properly together.

 

4、通电今后，我们还要发动会集光滑装轩，以确保光滑部位及光滑油路上有足够的光滑油，以做好该车床在运用前的一系列准备工作。

 

4. In the future, we will also launch a smooth assembly to ensure that there is enough smooth oil in the smooth part and smooth oil road, so as to make a series of preparations for the lathe before operation.

 

       以上就是关于自动化数控车床试运转前的准备的内容，更多相关内容请关注我们的网站。

 

Above is about the preparation of automatic CNC lathe before commissioning, more relevant content please pay attention to our website.